Cleaner for epoxy materials DIAMANT+
This is a liquid gel-like cleaner for removing residues, stains and stains from epoxy grout. The cleaner can be used in undiluted form, as well as diluted with water in all ratios, depending on the characteristics and type of contamination to be removed. It is not recommended to use the DIAMANT+ cleaner earlier than 2 hours after filling the joints with grout.
APPLICATION
The DIAMANT+ cleaner is designed for cleaning from epoxy residues of all types of ceramic coatings, including porcelain stoneware, as well as mosaics, glass mosaics, all types of natural stone. Before use, it is recommended to perform the test in an inconspicuous place.
DO NOT USE ON bases that are unstable to the effects of alkalis!
Before use, it is recommended to protect doors, windows, rubber seals, furniture, varnished items, bathtubs and shower trays made of synthetic materials such as acrylic, PVC, etc.and all surfaces that may be exposed to direct contact or product vapors. Thanks to the gel-like consistency, it is possible to perform work on both horizontal and vertical surfaces.
1. To remove fresh grout residues, as well as films, stains and stains from epoxy grout, it is recommended to dilute the cleaner with water in a ratio of 1:1 to 1:10 (one part of the cleaner per 10 parts of water). It is better to select the concentration of the solution experimentally, depending on the time that has passed since the preparation of the grout and the ambient temperature, given that with an increase in the ambient temperature, the polymerization rate of the epoxy grout increases. Mix the diluted solution. To remove fresh epoxy residues, stains and stains, it is preferable to use a cellulose sponge. Clean the surface with smooth movements, without pressing hard on the sponge to avoid damage to the seams. Do not allow the interaction of freshly rubbed epoxy grout with the DIAMANT+ cleaner for more than 2-3 minutes. Next, wash the entire treated surface with clean, warm water. If the remains of the epoxy grout remain on the surface, repeat the procedure.
2. To remove old epoxy residues, use an undiluted cleaner. Apply the cleaner to the surface with a brush or sponge, covering all the residues. Leave to act for about 30 minutes. This time may vary, depending on the stability of the epoxy residues. If the residues are very stable, leave the product to act for a longer time. Remove the residues in layers until the desired result is obtained.
TECHNICAL DATA Appearance-colorless gel-like liquid Application temperature from +9°C to +35°C. Storage ≈ 12 months in the original packaging Storage temperature from +5°C to +35°C.
Notes: keep away from frost, protect from direct exposure to direct sunlight and heat sources. Packaging-0.5 l bottle. The mixing ratio with water is in any proportions pH ≈ 11.5.
SAFETY MEASURES: Keep out of the reach of children and pets. The product may cause irritation. Work with "DIAMANT+" should be carried out in personal protective equipment (rubber gloves, eye and respiratory protection) In case of contact with the skin or eyes, rinse with plenty of water. If necessary, seek medical advice (help). Do not leave the package opened during operation.
